TLC372MDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Output Current | 20mA |
| Max Supply Current | 300μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC372MDRG4 Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, MOS, Open-Drain, TTL output.This chip is designed with the Tape & Reel (TR) package.You can find 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type Differential .There are a total of 2 elements in it.The device is equipped with 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -55°C~125°C .The comparator is equipped with 8 pins.You may wish to search TLC372 for more solutions that address your specific needs.This comparator presents a quiescent current of 400μA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 300μA .A supply current exceeding 300μA may result in the comparator malfunctioning.5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum of 5pA current into the device.Comparator electronics comes from the series of LinCMOS? comparator parts.This device is usually used in ADC circuits (packaged in TR ).
TLC372MDRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 400μA
TLC372MDRG4 Applications
There are a lot of Texas Instruments TLC372MDRG4 linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Analog front end
- Handheld Instruments
- Multivibrators and High-Voltage Digital Logic Gates
- Alarm and Monitoring Circuits
- Current and voltage sensing
- Automotive
- Notebooks and PDAs
- Portable and Battery-Powered Systems
- Window Comparators
