TLC372QD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 300μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Current - Output (Typ) | 20mA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC372QD Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.As a result, it is designed with Tube package.There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator is possible to classify the chip as Differential .In total, it contains 2 elements.As a result, it contains 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLC372 .There is 300μA current flowing in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 300μA supply current.If the current supply exceeds 150μA , the comparator might be damaged.In order to run the device, there are only 5V power supplies required.You are allowed to input a maximum current of 5pA into the device.Comparator electronics is part of the LinCMOS? comparator series.
TLC372QD Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 300μA
TLC372QD Applications
There are a lot of Texas Instruments TLC372QD linear comparators applications.
- Appliances
- Pulse, Squarewave, and Time Delay Generators
- Window Comparators, Multivibrators
- Ultra-Low Power Systems
- Portable and Battery-Powered Systems
- Power Supervision
- Notebooks and PDAs
- Wide Range VCO; MOS Clock Timers
- Multivibrators and High-Voltage Digital Logic Gates
- Analog front end
