banner_page

TLC372QDRG4

Surface Mount Tape & Reel (TR) 20mA mA 650 ns μs Linear Comparators 5pA pA 300μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC372QDRG4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 993
  • Description: Surface Mount Tape & Reel (TR) 20mA mA 650 ns μs Linear Comparators 5pA pA 300μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Supply Voltage 5V
Base Part Number TLC372
Pin Count 8
Output Type CMOS, MOS, Open-Drain, TTL
Operating Supply Voltage 15V
Number of Elements 2
Power Supplies 5V
Nominal Supply Current 300μA
Output Current 20mA
Max Supply Current 300μA
Quiescent Current 300μA
Response Time 650 ns
Voltage - Supply, Single/Dual (±) 4V~16V ±2V~8V
Output Current per Channel 6mA
Input Offset Voltage (Vos) 5mV
Average Bias Current-Max (IIB) 0.00003μA
Max Input Current 5pA
Dual Supply Voltage 5V
Input Bias Current 5pA
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 5pA @ 5V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Differential
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2

TLC372QDRG4 Overview


A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, MOS, Open-Drain, TTL output type for this comparator.The part will be shipped by Tape & Reel (TR) .8 terminals are found on the comparator.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as Differential .A total of 2 elements can be found in it.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator has 8 pins.If you require more pin-to-pin solutions, search TLC372 for more options.As a result, this comparator displays a quiescent current of 300μA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 300μA .A current supply greater than 300μA may result in the comparator malfunctioning.5V power supplies are enough to run the device.A maximum current of 5pA can be supplied to the device.In this case, the part is from the LinCMOS? comparator series.The operating supply voltage for normal operation should be 15V .The device is packed in TR and is intended for general use (as an element in the ADC circuit).

TLC372QDRG4 Features


CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 300μA

TLC372QDRG4 Applications


There are a lot of Texas Instruments TLC372QDRG4 linear comparators applications.

  • Body Control Modules
  • Automatic Test Equipment
  • Hand-Held Electronics
  • Handheld Instruments
  • General-Purpose Portable Devices
  • General Purpose Low Voltage Applications
  • Consumer Medical Electronics
  • DC/DC and AC/DC power supplies
  • General-Purpose, Low-Voltage Applications
  • Power Supervision

Write a review

Note: HTML is not translated!
    Bad           Good