TLC374CD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 15V |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Supply Voltage Limit-Max | 18V |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC374CD Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, MOS, Open-Drain, TTL is used for this comparator.We ship the part through Tube .The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical Differential comparator.As a result, it contains 14 pins.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.There are 14 pins on the comparator.You can find more pin-to-pin solutions by searching TLC374 .In this comparator, the quiescent current is 800μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 600μA .If the current supply exceeds 150μA , the comparator might be damaged.5V power supplies are enough to run the device.The part is from LinCMOS? comparator series.For normal operation, there should be 15V operating supply voltage applied.
TLC374CD Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 800μA
TLC374CD Applications
There are a lot of Texas Instruments TLC374CD linear comparators applications.
- Motor drives
- Point of load regulators
- Window Comparators, Multivibrators
- Automotive
- Window Comparators
- Security Detection Systems
- System control and monitoring
- General Purpose Low Voltage Applications
- General-Purpose Portable Devices
- Automatic Test Equipment
