TLC374CDRG4
| Parameters | |
|---|---|
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 150μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 800μA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TLC374CDRG4 Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.We ship the part through Tape & Reel (TR) .As you can see, the comparator has14 terminals.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical Differential comparator.There are a total of 4 elements in it.The device is equipped with 14 pins.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .14 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLC374 .In this comparator, the quiescent current is 800μA .There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 150μA .A supply current exceeding 150μA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.The part belongs to the LinCMOS? series of comparator parts.This device is usually used in ADC circuits (packaged in TR ).
TLC374CDRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 800μA
TLC374CDRG4 Applications
There are a lot of Texas Instruments TLC374CDRG4 linear comparators applications.
- Lithium ion battery monitoring
- Power management
- Window Comparators
- Current and voltage sensing
- Building automation
- High-Speed Sampling Circuits
- Limit Comparators
- Wide Range VCO; MOS Clock Timers
- Battery-Powered Electronics
- Point of load regulators
