TLC374CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Current - Output (Typ) | 20mA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC374CN Overview
The product is packaged in 14-DIP (0.300, 7.62mm) to facilitate transportation.There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.The part will be shipped by Tube .The comparator has 14 terminals.The electrical component in this case belongs to the Comparator families.A comparator supplied with 5V voltage can complete many demanding tasks.In general, the chip type can be classified as Differential .There are 14 pins on this board.Electronic comparator is recommended to mount the device using type Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There are 14 pins on the comparator.You may wish to search TLC374 for more solutions that address your specific needs.There is a quiescent current of 800μA in this comparator.The PCB or other board can be mounted using the Through Hole on it.Normal operation of the device requires a nominal supply current of 600μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 150μA .This device requires 5V power supplies to operate.Input current to the device cannot exceed 5pA .The part belongs to the LinCMOS? series of comparator parts.
TLC374CN Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 800μA
TLC374CN Applications
There are a lot of Texas Instruments TLC374CN linear comparators applications.
- Wireless Base Stations
- Appliances
- Mobile Communications
- General Purpose Low Voltage Applications
- Security Detection Systems
- Power management
- Self-diagnostics
- Battery-Powered Electronics
- Factory automation & control
- Battery-Powered Electronics
