Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Weight |
927.99329mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
500mW |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
TLC374 |
Pin Count |
14 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
600μA |
Power Dissipation |
500mW |
Output Current |
20mA |
Max Supply Current |
600μA |
Quiescent Current |
800μA |
Response Time |
650 ns |
Voltage - Supply, Single/Dual (±) |
3V~16V ±1.5V~8V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.00003μA |
Supply Voltage Limit-Max |
18V |
Max Input Current |
5pA |
Input Bias Current |
600pA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
5pA @ 5V |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC374CN-A Overview
Electronic comparator is packaged in 14-DIP (0.300, 7.62mm) for convenient transportation.This comparator is of the CMOS, MOS, Open-Drain, TTL output type.This device is designed in Tube case.There are14 terminals on the comparator.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical Differential comparator.Electronic comparator has a total of 4 elements.The device is equipped with 14 pins.In general, mounting type Through Hole is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.Electronic comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLC374 .This comparator presents a quiescent current of 800μA .There is a Through Hole for mounting it on a PCB or other board.Normally, the nominal supply current should be 600μA when using the device.If the current supply exceeds 600μA , the comparator might be damaged.The device can be run with 5V power supplies.You are allowed to input a maximum current of 5pA into the device.The part is based on LinCMOS? .
TLC374CN-A Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 800μA
TLC374CN-A Applications
There are a lot of Texas Instruments TLC374CN-A linear comparators applications.
- Self-diagnostics
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- Lithium ion battery monitoring
- Power management
- General-Purpose, Low-Voltage Applications
- Window Comparators, Multivibrators
- Automatic Test Equipment
- Wireless Base Stations
- Mobile Communications