TLC374CPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 5/10V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 700mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC374CPWR Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, MOS, Open-Drain, TTL output.Ready for shipping in Cut Tape (CT) package.The comparator has a total of 14 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator can be classified as a Differential chip.Currently, it consists of only 4 elements.The device includes 14 pins.The recommended mounting type is Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.The comparator is equipped with 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLC374 .A quiescent current of 800μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 600μA .A supply current exceeding 150μA may result in the comparator malfunctioning.A power supply of 5/10V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum of 5pA current into the device.Comparator electronics is part of the LinCMOS? comparator series.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLC374CPWR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 800μA
TLC374CPWR Applications
There are a lot of Texas Instruments TLC374CPWR linear comparators applications.
- Lithium ion battery monitoring
- Zero-Crossing Detectors
- Current and voltage sensing
- Metering Systems
- Motor drives
- Window Comparators
- Threshold Detectors
- Wide Range VCO; MOS Clock Timers
- High-Speed Differential Line Receiver
- Consumer Medical Electronics
