TLC374IDR
| Parameters | |
|---|---|
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 15V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
TLC374IDR Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.The part will be shipped by Tape & Reel (TR) .There are14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type Differential .Currently, it consists of only 4 elements.Electronic comparator includes 14 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 14 pins on the comparator.Alternatively, you may search for TLC374 to find more pin-to-pin solutions for your specific needs.As a result, this comparator displays a quiescent current of 800μA .Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires a nominal supply current of 600μA .A supply current exceeding 150μA may result in the comparator malfunctioning.This device requires 5V power supplies to operate.Electronic comparator is possible to input a maximum current of 5pA into the device.In this case, the part is from the LinCMOS? comparator series.A normal operation requires a voltage of 15V .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLC374IDR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 800μA
TLC374IDR Applications
There are a lot of Texas Instruments TLC374IDR linear comparators applications.
- Zero-Crossing Detectors
- General-Purpose, Low-Voltage Applications
- Portable and Battery-Powered Systems
- Threshold Detectors
- Metering Systems
- Analog front end
- Set Top Boxes
- Limit Comparators
- Security Detection Systems
- Handheld Instruments
