TLC374IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 150μA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC374IN Overview
To facilitate transportation, it comes packaged in 14-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, MOS, Open-Drain, TTL is being used.This device is designed in Tube case.There are14 terminals on the comparator.Electronic comparator is a component of the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator is possible to classify the chip as Differential .Electronic comparator consists of 4 elements in total.There are 14 pins on this board.The recommended mounting type is Through Hole .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Electronic comparator has 14 pins.Search TLC374 to find more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 800μA .There is a Through Hole for mounting it on a PCB or other board.Normal operation of the device requires 600μA supply current.If the current supply exceeds 150μA , the comparator could malfunction.The device can be powered by 5V power supplies.The maximal current your can input into the device is 5pA .This part is from the LinCMOS? comparator series.Comparator electronics is necessary to have a voltage of 9V for normal operation.
TLC374IN Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 800μA
TLC374IN Applications
There are a lot of Texas Instruments TLC374IN linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Battery management and protection
- Wearable Devices
- Building automation
- Notebooks and PDAs
- Automotive
- Motor drives
- Simple Analog-to-Digital Converters (ADCs)
- Infotainment and Clusters
- Window Comparators
