TLC374MD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 127.998097mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 600μA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC374MD Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.Electronic comparator is shipped by Tube .There are14 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.This is a typical comparator of type Differential .This is a 4 element comparator.The board includes 14 pins.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .There are 14 pins on the comparator.Try search TLC374 to get more pin-to-pin solutions for your special needs.A quiescent current of 800μA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 600μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 600μA .A power supply of 5V is sufficient for the operation of the device.You are allowed to input a maximum current of 5pA into the device.Comparator electronics comes from the series of LinCMOS? comparator parts.Packed in TR , this device is for general uses (often in ADC circuits).
TLC374MD Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 800μA
TLC374MD Applications
There are a lot of Texas Instruments TLC374MD linear comparators applications.
- Wireless Base Stations
- Self-diagnostics
- Portable and Battery-Powered Systems
- Current and voltage sensing
- Security Detection Systems
- Zero-Crossing Detectors
- Infotainment and Clusters
- General-Purpose, Low-Voltage Applications
- Wide Range VCO; MOS Clock Timers
- Hand-Held Electronics
