TLC374MDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | -5mA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC374MDG4 Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, MOS, Open-Drain, TTL .Ready for shipping in Tube package.As you can see, the comparator has14 terminals.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a Differential chip.There are a total of 4 elements in it.The board includes 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -55°C~125°C in order to prevent malfunctions.There are 14 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLC374 .The comparator presents a quiescent current of 800μA volts.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires 600μA supply current.A current supply greater than -5mA may cause the comparator to malfunction.In order to operate the device, 5V power supplies are sufficient.You can input a maximum current of 5pA into this device.The part is from LinCMOS? comparator series.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLC374MDG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 800μA
TLC374MDG4 Applications
There are a lot of Texas Instruments TLC374MDG4 linear comparators applications.
- Automotive
- Laptop Computers
- Window Comparators
- Simple Analog-to-Digital Converters (ADCs)
- High-Speed Sampling Circuits
- Metering Systems
- Notebooks and PDAs
- System control and monitoring
- Wearable Devices
- General-Purpose, Low-Voltage Applications
