Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
725mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC393 |
Pin Count |
8 |
Output Type |
MOS, Open-Drain |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Number of Circuits |
2 |
Nominal Supply Current |
40μA |
Power Dissipation |
725mW |
Output Current |
20mA |
Max Supply Current |
20μA |
Propagation Delay |
4.5 μs |
Quiescent Current |
50μA |
Response Time |
2500 ns |
Common Mode Rejection Ratio |
84 dB |
Voltage - Supply, Single/Dual (±) |
3V~16V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Power Supply Rejection Ratio (PSRR) |
85dB |
Max Input Current |
5pA |
Input Bias Current |
5pA |
Current - Quiescent (Max) |
50μA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
5pA @ 5V |
CMRR, PSRR (Typ) |
84dB CMRR |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC393CD Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has a MOS, Open-Drain output.As a result, it is designed with Tube package.As you can see, the comparator has8 terminals.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.It's a typical General Purpose comparator.There are 8 pins on this board.The recommended mounting type is Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.This comparator has 8 pins.Try search TLC393 to get more pin-to-pin solutions for your special needs.As a result, this comparator displays a quiescent current of 50μA .Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 40μA .A supply current exceeding 20μA may result in the comparator malfunctioning.This device requires 5V power supplies to operate.A maximum current of 5pA can be supplied to the device.The part is based on LinCMOS? .The operating supply voltage for normal operation should be 5V .
TLC393CD Features
MOS, Open-Drain output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 50μA
TLC393CD Applications
There are a lot of Texas Instruments TLC393CD linear comparators applications.
- Infotainment and Clusters
- Infotainment & cluster
- Mobile Phones and Tablets
- Appliances
- Hand-Held Electronics
- Mobile Phones
- Mobile Communications
- Point of load regulators
- High-Speed Sampling Circuits
- RC Timers