banner_page

TLC393CDR

Surface Mount Tape & Reel (TR) 20mA mA 2500 ns μs Linear Comparators 5pA pA 40μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC393CDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 357
  • Description: Surface Mount Tape & Reel (TR) 20mA mA 2500 ns μs Linear Comparators 5pA pA 40μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 72.603129mg
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Subcategory Comparator
Packing Method TR
Max Power Dissipation 725mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number TLC393
Pin Count 8
Output Type MOS, Open-Drain
Operating Supply Voltage 5V
Number of Elements 2
Power Supplies 5V
Nominal Supply Current 40μA
Power Dissipation 725mW
Output Current 20mA
Max Supply Current 20μA
Propagation Delay 4.5 μs
Quiescent Current 50μA
Response Time 2500 ns
Common Mode Rejection Ratio 84 dB
Voltage - Supply, Single/Dual (±) 3V~16V
Output Current per Channel 6mA
Input Offset Voltage (Vos) 5mV
Power Supply Rejection Ratio (PSRR) 85dB
Max Input Current 5pA
Input Bias Current 5pA
Current - Quiescent (Max) 50μA
Voltage - Input Offset (Max) 5mV @ 10V
Current - Input Bias (Max) 5pA @ 5V
CMRR, PSRR (Typ) 84dB CMRR
Height 1.75mm
Length 4.9mm

TLC393CDR Overview


A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type MOS, Open-Drain output.This chip is designed with the Tape & Reel (TR) package.As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator families.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical General Purpose comparator.This element consists of 2 elements in total.Electronic comparator has 8 pins.The recommended mounting type is Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLC393 .There is a quiescent current of 50μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 40μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 20μA .In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input a maximum of 5pA current into the device.The part is from LinCMOS? comparator series.The operating supply voltage for normal operation should be 5V .Packed in TR , this device is for general uses (often in ADC circuits).

TLC393CDR Features


MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 50μA

TLC393CDR Applications


There are a lot of Texas Instruments TLC393CDR linear comparators applications.

  • System control and monitoring
  • Infotainment and Clusters
  • Infotainment & cluster
  • Point of load regulators
  • Hand-Held Electronics
  • Threshold Detectors
  • Notebooks and PDAs
  • Zero-Crossing Detectors
  • Self-diagnostics
  • Window Comparators, Multivibrators

Write a review

Note: HTML is not translated!
    Bad           Good