TLC393CP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC393 |
| Pin Count | 8 |
| Output Type | MOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Operating Supply Current | 40mA |
| Nominal Supply Current | 22μA |
| Power Dissipation | 1W |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 50μA |
| Turn On Delay Time | 1.1 μs |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1.4mV |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 50μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Ambient Temperature Range High | 70°C |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC393CP Overview
The product is packaged in 8-DIP (0.300, 7.62mm) for ease of transportation.Output type of this comparator is MOS, Open-Drain .The part is shipped by Tube .There are 8 terminals on the comparator.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .Electronic comparator has 8 pins.Through Hole universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator consists of 8 pins.In order to find a solution that meets your specific needs, search TLC393 for more pin-to-pin solutions.In this comparator, the quiescent current is 50μA .The PCB or other board can be mounted using the Through Hole on it.Normally, the nominal supply current should be 22μA when using the device.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 20μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Comparator electronics comes from the series of LinCMOS? comparator parts.The normal operation of the system requires 5V operating voltage.
TLC393CP Features
MOS, Open-Drain output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 50μA
TLC393CP Applications
There are a lot of Texas Instruments TLC393CP linear comparators applications.
- Factory automation & control
- Threshold Detectors
- Self-diagnostics
- Analog front end
- Point of load regulators
- Lithium ion battery monitoring
- Pulse, Squarewave, and Time Delay Generators
- Wireless Base Stations
- Portable Battery Monitoring
- RC Timers
