TLC393CPSG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 8 |
| Weight | 122.611688mg |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1W |
| Current - Output | 20mA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 50μA |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 5pA |
| Input Offset Voltage (Vos) | 5mV |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
TLC393CPSG4 Overview
The product is packaged in SOP in order to facilitate transportation.Speaking of types, this is a typical General Purpose comparator.Electronic comparator has a total of 2 elements.There are 8 pins on the comparator.There is a quiescent current of 50μA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 40μA in order to use the device normally.Keeping the temperature below 70°C is not recommended.Comparator electronics cannot be operated at a temperature lower than 0°C .Compatibility is defined as 16V when the comparator is operating at its maximum supply voltage.A minimum supply voltage of 3V is allowed for this comparator.For normal operation, there should be 5V operating supply voltage applied.Comparator electronics has an output current rated at 20mA .
TLC393CPSG4 Features
General Purpose IC
Employing 2 elements
Quiescent Current: 50μA
TLC393CPSG4 Applications
There are a lot of Texas Instruments TLC393CPSG4 linear comparators applications.
- Consumer Medical Electronics
- Automotive
- Multivibrators and High-Voltage Digital Logic Gates
- Notebooks and PDAs
- Power management
- RC Timers
- High-Speed Differential Line Receiver
- Wearable Devices
- Zero-Crossing Detectors
- Window Comparators
