Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.209, 5.30mm Width) |
Number of Pins |
8 |
Weight |
122.611688mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
1W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLC393 |
Pin Count |
8 |
Output Type |
MOS, Open-Drain |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
20μA |
Power Dissipation |
1W |
Output Current |
20mA |
Max Supply Current |
20μA |
Propagation Delay |
4.5 μs |
Quiescent Current |
50μA |
Response Time |
2500 ns |
Common Mode Rejection Ratio |
84 dB |
Voltage - Supply, Single/Dual (±) |
3V~16V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Power Supply Rejection Ratio (PSRR) |
84dB |
Max Input Current |
5pA |
Input Bias Current |
600pA |
Current - Quiescent (Max) |
50μA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
5pA @ 5V |
CMRR, PSRR (Typ) |
84dB CMRR |
Height |
2mm |
Length |
6.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC393CPSR Overview
The product is packaged in 8-SOIC (0.209, 5.30mm Width) for ease of transportation.There is a MOS, Open-Drain output type for this comparator.As a result, it is designed with Tape & Reel (TR) package.The device is designed with 8 terminations.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical General Purpose comparator.The total number of elements is 2 .The device is equipped with 8 pins.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.There are 8 pins on the comparator.You may wish to search TLC393 for more solutions that address your specific needs.There is a quiescent current of 50μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 20μA in order to use the device normally.An excess of current supply over 20μA could result in malfunction of the comparator.The device can be run with 5V power supplies.Electronic comparator is possible to input a maximum current of 5pA into the device.Comparator electronics is part of the LinCMOS? comparator series.For normal operation, there should be 5V operating supply voltage applied.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLC393CPSR Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 50μA
TLC393CPSR Applications
There are a lot of Texas Instruments TLC393CPSR linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Simple Analog-to-Digital Converters (ADCs)
- Body Control Modules
- Industrial
- Set Top Boxes
- General-Purpose Portable Devices
- Infotainment and Clusters
- Wireless Base Stations
- Automotive
- General Purpose Low Voltage Applications