TLC393CPSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 8 |
| Weight | 122.611688mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1W |
| Nominal Supply Current | 20μA |
| Power Dissipation | 1W |
| Max Supply Current | 20μA |
| Current - Output | 20mA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 50μA |
| Response Time | 1.1 μs |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 5pA |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC393CPSRG4 Overview
For convenience, it is packaged in SOP .This package has been designed with Tape and Reel .8 terminals are found on the comparator.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.The type of the chip can be classified as General Purpose .The board includes 8 pins.The comparator has 8 pins.There is 50μA current flowing in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 20μA .A supply current exceeding 20μA may result in the comparator malfunctioning.This device requires 5V power supplies to operate.Temperatures above 70°C are not recommended.Comparator electronics is not suComparator electronicsable for temperatures below 0°C .In the comparator, the maximum supply voltage is 16V .A minimum supply voltage of 3V is permitted for this comparator.To maintain the output quality, 2 channels work together.For normal operation, there should be 5V operating supply voltage applied.There is 20mA output current for this device.
TLC393CPSRG4 Features
General Purpose IC
Quiescent Current: 50μA
TLC393CPSRG4 Applications
There are a lot of Texas Instruments TLC393CPSRG4 linear comparators applications.
- Battery-Powered Electronics
- General-Purpose Portable Devices
- Hand-Held Electronics
- Mobile Phones
- General-Purpose, Low-Voltage Applications
- Current and voltage sensing
- System control and monitoring
- Power management
- Portable Battery Monitoring
- Zero-Crossing Detectors
