TLC393CPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 525mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC393 |
| Pin Count | 8 |
| Output Type | MOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 50μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 50μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC393CPW Overview
Electronic comparator is packaged in 8-TSSOP (0.173, 4.40mm Width) for convenient transportation.Output type of this comparator is MOS, Open-Drain .This chip is designed with the Tube package.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator families.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a General Purpose chip.Currently, it consists of only 2 elements.The device contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.Electronic comparator has 8 pins.Search TLC393 to find more pin-to-pin solutions.There is a quiescent current of 50μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.The nominal supply current of the device should be 20μA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 20μA .The device can be run with 5V power supplies.This part is from the LinCMOS? comparator series.The normal operation of the system requires 5V operating voltage.
TLC393CPW Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 50μA
TLC393CPW Applications
There are a lot of Texas Instruments TLC393CPW linear comparators applications.
- Infotainment & cluster
- Pulse, Squarewave, and Time Delay Generators
- Mobile Communications
- Body Control Modules
- Threshold Detectors
- Building automation
- Window Comparators
- Battery-Powered Electronics
- Wearable Devices
- RC Timers
