TLC393ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC393 |
| Pin Count | 8 |
| Output Type | MOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 65μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC393ID Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is MOS, Open-Drain .This package has been designed with Tube .As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.With a 5V voltage supply, the comparator can perform multiple demanding tasks.It's a typical General Purpose comparator.This element consists of 2 elements in total.The device contains 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions for your special requirements by searching TLC393 .The comparator displays a quiescent current of 65μA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to 40μA .An excess of current supply over 40μA could result in malfunction of the comparator.5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum current of 5pA into the device.A comparator part from the LinCMOS? series is used in this part.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
TLC393ID Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC393ID Applications
There are a lot of Texas Instruments TLC393ID linear comparators applications.
- Security Detection Systems
- Mobile Phones and Tablets
- Ultra-Low Power Systems
- Zero-Crossing Detectors
- Lithium ion battery monitoring
- System control and monitoring
- Mobile Communications
- Alarm and Monitoring Circuits
- Point of load regulators
- Self-diagnostics
