TLC393IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC393 |
| Pin Count | 8 |
| Output Type | MOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 65μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC393IDR Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .There is a MOS, Open-Drain output type for this comparator.This device is designed in Cut Tape (CT) case.As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.Electronic comparator has a total of 2 elements.The board includes 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator is equipped with 8 pins.In order to find a solution that meets your specific needs, search TLC393 for more pin-to-pin solutions.A quiescent current of 65μA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 40μA .An excess of current supply over 20μA could result in malfunction of the comparator.In order to run the device, there are only 5V power supplies required.There is a maximum current that can be input into the device of 5pA .In this case, the part is from the LinCMOS? comparator series.The operating supply voltage for normal operation should be 5V .With a TR package, this device is designed for general use (usually in ADC circuits).
TLC393IDR Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC393IDR Applications
There are a lot of Texas Instruments TLC393IDR linear comparators applications.
- Appliances
- RC Timers
- Current and voltage sensing
- Power management
- Body Control Modules
- Zero-Crossing Detectors
- Window Comparators
- Lithium ion battery monitoring
- Laptop Computers
- System control and monitoring
