TLC393IDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC393 |
| Pin Count | 8 |
| Output Type | MOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 65μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC393IDRG4 Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the MOS, Open-Drain output type.Electronic comparator is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 2 elements in it.The device contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 8 pins.You can find more pin-to-pin solutions by searching TLC393 .There is a quiescent current of 65μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 40μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 40μA .In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input a maximum current of 5pA into the device.A comparator part from the LinCMOS? series is used in this part.For normal operation, there should be 5V operating supply voltage applied.The device is acceptable to pack by TR .
TLC393IDRG4 Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC393IDRG4 Applications
There are a lot of Texas Instruments TLC393IDRG4 linear comparators applications.
- Window Comparators
- Limit Comparators
- Infotainment & cluster
- Security Detection Systems
- Battery-Powered Electronics
- Automotive
- Alarm and Monitoring Circuits
- Wide Range VCO; MOS Clock Timers
- Mobile Communications
- Infotainment and Clusters
