TLC393IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 525mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC393 |
| Pin Count | 8 |
| Output Type | MOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 65μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC393IPW Overview
For convenience, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .A comparator with a MOS, Open-Drain output is used here.The part is shipped by Tube .You can find 8 terminals of the comparator.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.When it comes to types, this comparator is a typical General Purpose .Currently, it consists of only 2 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.You may wish to search TLC393 for more solutions that address your specific needs.The comparator presents a quiescent current of 65μA volts.The board has a Surface Mount for mounting on a PCB or any other board.For normal use of the device, the nominal supply current should be 20μA .An excess of current supply over 20μA could result in malfunction of the comparator.The device can be run with 5V power supplies.A comparator part from the LinCMOS? series is used in this part.A normal operation requires a voltage of 5V .
TLC393IPW Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC393IPW Applications
There are a lot of Texas Instruments TLC393IPW linear comparators applications.
- Limit Comparators
- Mobile Communications
- Window Comparators
- Mobile Phones
- Metering Systems
- Handheld Instruments
- Power Supervision
- Appliances
- Infotainment & cluster
- High-Speed Sampling Circuits
