TLC393IPWG4
| Parameters | |
|---|---|
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC393 |
| Pin Count | 8 |
| Output Type | MOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 65μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Input Offset Voltage (Vos) | 5mV |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
TLC393IPWG4 Overview
Electronic comparator is packaged in 8-TSSOP (0.173, 4.40mm Width) for convenient transportation.There is a comparator of type MOS, Open-Drain output on this device.Ready for shipping in Tube package.As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.The total number of elements is 2 .Electronic comparator has 8 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .This comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TLC393 .There is a quiescent current of 65μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 40μA for normal use.If the current supply exceeds 40μA , the comparator could malfunction.The device can be operated with 5V power supplies.The part belongs to the LinCMOS? series of comparator parts.Normal operation requires 5V operating supply voltage.
TLC393IPWG4 Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC393IPWG4 Applications
There are a lot of Texas Instruments TLC393IPWG4 linear comparators applications.
- Portable Battery Monitoring
- Zero-Crossing Detectors
- Power Supervision
- Window Comparators
- Limit Comparators
- Hand-Held Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Point of load regulators
- Power management
- Window Comparators
