TLC393IPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 525mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC393 |
| Pin Count | 8 |
| Output Type | MOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 65μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 3V~16V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC393IPWRG4 Overview
Electronic comparator is packaged in 8-TSSOP (0.173, 4.40mm Width) for convenient transportation.This comparator is of the MOS, Open-Drain output type.This package has been designed with Tape & Reel (TR) .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.It's a typical General Purpose comparator.Currently, it consists of only 2 elements.A total of 8 pins are included.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.Electronic comparator has 8 pins.Try search TLC393 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 65μA in this comparator.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 40μA .If the current supply exceeds 40μA , the comparator could malfunction.In order to run the device, there are only 5V power supplies required.In this case, the part is from the LinCMOS? comparator series.The normal operation of the system requires 5V operating voltage.With a TR package, this device is designed for general use (usually in ADC circuits).
TLC393IPWRG4 Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC393IPWRG4 Applications
There are a lot of Texas Instruments TLC393IPWRG4 linear comparators applications.
- Portable and Battery-Powered Systems
- Wireless Base Stations
- Building automation
- Appliances
- Zero-Crossing Detectors
- DC/DC and AC/DC power supplies
- System control and monitoring
- Handheld Instruments
- Lithium ion battery monitoring
- Laptop Computers
