TLC393QDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC393 |
| Pin Count | 8 |
| Output Type | MOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 90μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 90μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC393QDRG4Q1 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with a MOS, Open-Drain output is used here.This package has been designed with Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a General Purpose chip.The total number of elements is 2 .Electronic comparator includes 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .8 pins are present on the comparator.Try search TLC393 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 90μA .The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 40μA .If the current supply exceeds 40μA , the comparator might be damaged.The device can be run with 5V power supplies.Input current to the device is limited to 5pA .In this case, the part is from the Automotive, AEC-Q100, LinCMOS? comparator series.For normal operation, there should be 5V operating supply voltage applied.Packed in TR , this device is for general uses (often in ADC circuits).
TLC393QDRG4Q1 Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 90μA
TLC393QDRG4Q1 Applications
There are a lot of Texas Instruments TLC393QDRG4Q1 linear comparators applications.
- Limit Comparators
- Portable Battery Monitoring
- Set Top Boxes
- Point of load regulators
- Mobile Phones and Tablets
- System control and monitoring
- High-Speed Differential Line Receiver
- Automotive
- Notebooks and PDAs
- Self-diagnostics
