banner_page

TLC393QDRQ1

Surface Mount Cut Tape (CT) 20mA mA 2500 ns μs Linear Comparators 5pA pA 40μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC393QDRQ1
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 744
  • Description: Surface Mount Cut Tape (CT) 20mA mA 2500 ns μs Linear Comparators 5pA pA 40μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Cut Tape (CT)
Series Automotive, AEC-Q100, LinCMOS™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number TLC393
Pin Count 8
Output Type MOS, Open-Drain
Operating Supply Voltage 5V
Number of Elements 2
Power Supplies 5V
Nominal Supply Current 40μA
Output Current 20mA
Max Supply Current 40μA
Propagation Delay 4.5 μs
Quiescent Current 90μA
Response Time 2500 ns
Common Mode Rejection Ratio 84 dB
Voltage - Supply, Single/Dual (±) 4V~16V
Input Offset Voltage (Vos) 5mV
Average Bias Current-Max (IIB) 0.00003μA
Power Supply Rejection Ratio (PSRR) 84dB
Max Input Current 5pA
Input Bias Current 5pA
Current - Quiescent (Max) 90μA
Voltage - Input Offset (Max) 5mV @ 10V
Current - Input Bias (Max) 5pA @ 5V
CMRR, PSRR (Typ) 84dB CMRR
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC393QDRQ1 Overview


A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .The comparator has a type MOS, Open-Drain output.The chip is packaged with Cut Tape (CT) .As you can see, the comparator has8 terminals.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.The device is equipped with 8 pins.In general, mounting type Surface Mount is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator has a pin count of 8 .In case you are looking for more pin-to-pin solutions, you may want to search TLC393 .There is a quiescent current of 90μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 40μA when using the device.If the current supply exceeds 40μA , the comparator might be damaged.There is sufficient power to run the device from 5V power supplies.Input current to the device is limited to 5pA .This part is from the Automotive, AEC-Q100, LinCMOS? comparator series.For normal operation, the operating supply voltage must be 5V .With a TR package, this device is designed for general use (usually in ADC circuits).

TLC393QDRQ1 Features


MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 90μA

TLC393QDRQ1 Applications


There are a lot of Texas Instruments TLC393QDRQ1 linear comparators applications.

  • Building automation
  • Zero-Crossing Detectors
  • General Purpose Low Voltage Applications
  • Appliances
  • Portable Battery Monitoring
  • High-Speed Sampling Circuits
  • Mobile Phones
  • Automotive
  • Window Comparators, Multivibrators
  • High-Speed Differential Line Receiver

Write a review

Note: HTML is not translated!
    Bad           Good