TLC4502ACD

2 Channels 50mA per Channel 1pA 90 dB Instrumentational OP Amps 0.00006μA 5V 4V~6V ±2V~3V TLC4502 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC4502ACD
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 657
Description: 2 Channels 50mA per Channel 1pA 90 dB Instrumentational OP Amps 0.00006μA 5V 4V~6V ±2V~3V TLC4502 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Series	LinEPIC™, Self-Cal™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLC4502
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Power Supplies	5V
Number of Channels	2
Operating Supply Current	2.5mA
Nominal Supply Current	3.5mA
Power Dissipation	725mW
Output Current	50mA
Slew Rate	2.5V/μs
Architecture	CHOPPER-STAB
Amplifier Type	General Purpose
Common Mode Rejection Ratio	90 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	4V~6V ±2V~3V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	50μV
Bandwidth	4.7MHz
Unity Gain BW-Nom	4700 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	10μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Max I/O Voltage	50μV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC4502ACD Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. In this case, there are 8 pins on the board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 50μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. Using a supply current of 2.5mA , this buffer op amp will be able to operate. Op amp is a member of the 120dB's 120dB family. 2 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. LinEPIC?, Self-Cal? corresponds to the op amp's series.