TLC4502CD

2 Channels 50mA per Channel 1pA 90 dB Instrumentational OP Amps 0.00006μA 5V 4V~6V ±2V~3V TLC4502 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLC4502CD
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 219
Description: 2 Channels 50mA per Channel 1pA 90 dB Instrumentational OP Amps 0.00006μA 5V 4V~6V ±2V~3V TLC4502 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Series	LinEPIC™, Self-Cal™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLC4502
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Power Supplies	5V
Number of Channels	2
Operating Supply Current	2.5mA
Nominal Supply Current	3.5mA
Power Dissipation	725mW
Output Current	50mA
Slew Rate	2.5V/μs
Architecture	CHOPPER-STAB
Amplifier Type	General Purpose
Common Mode Rejection Ratio	90 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	4V~6V ±2V~3V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	100μV
Bandwidth	4.7MHz
Unity Gain BW-Nom	4700 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	10μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Max I/O Voltage	100μV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC4502CD Overview

Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. Operational amplifier can operate supply current at 2.5mA. Voltage gain should remain at 120dB. On the buffer amps, there are 2 channels that can be used. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. LinEPIC?, Self-Cal? is the number that corresponds to the series of the buffer op amp.