TLC549IP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 15mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLC549 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 1.8mA |
| Number of Bits | 8 |
| Input Type | Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 1 B |
| Sampling Rate | 40 ksps |
| Voltage - Supply, Analog | 3V~6V |
| Voltage - Supply, Digital | 3V~6V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 40k |
| Output Bit Code | BINARY |
| Power Consumption | 9mW |
| Integral Nonlinearity (INL) | 0.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 40 ksps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 6V |
| Output Format | SERIAL |
| Max Supply Voltage (DC) | 6V |
| Differential Nonlinearity | 0.5 LSB |
| Min Supply Voltage (DC) | 3V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC549IP Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 8-DIP (0.300, 7.62mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 8 pin count.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 40k Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 3V~6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to TLC549 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 3V~6V.The ADC converter operates with the maximal supply voltage of 6V.It operates with the minimal supply voltage of 3V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 6V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 15mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 40 ksps.The digital converter operates with the minimal supply voltage (DC) of 3V.The ADC converter operates with the maximal supply voltage (DC) of 6V.
TLC549IP Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 3V
Maximal supply voltage (DC) of 6V
TLC549IP Applications
There are a lot of Texas Instruments TLC549IP ADC applications.
- Communication Systems
- Communication test equipment
- Multiplexed Data Acquisition Systems
- CMOS Image sensors for mobile applications
- 4-channel data acquisition
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Automotive
- Smart antenna systems
- Battery Operated Systems
- Cell Phones
