TLC5510INS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | 20°C~75°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 127.5mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC5510 |
| Pin Count | 24 |
| Polarity | Unipolar |
| Power Supplies | 5V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 18mA |
| Number of Bits | 8 |
| Input Type | Single Ended |
| Architecture | Flash |
| Supply Type | Analog, Digital |
| Reference Type | Internal |
| Data Interface | Parallel |
| Resolution | 1 B |
| Sampling Rate | 20 Msps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 20M |
| Output Bit Code | BINARY |
| Power Consumption | 128mW |
| Linearity Error-Max (EL) | 0.3906% |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 20 Msps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 46 dB |
| Max Supply Voltage (DC) | 5.25V |
| Min Supply Voltage (DC) | 4.75V |
| Analog Input Voltage-Min | -2V |
| Spurious-free dynamic range (SFDR) | 45 dB |
| Height | 2mm |
| Length | 15mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5510INS Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 24-SOIC (0.209, 5.30mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 24 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 24 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 20°C~75°C.The number of samples of audio recorded every second is 20M Hz.The input type of this electronic AD converter is Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Flash.There are 24 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to TLC5510 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.It is possible to categorize the supply type according to Analog, Digital.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.The maximal analog input voltage of this electrical AD converter is 2V.The ADC converter operates from 5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 127.5mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 20 Msps.The minimal analog input voltage of this electrical AD converter is -2V.The digital converter operates with the minimal supply voltage (DC) of 4.75V.The ADC converter operates with the maximal supply voltage (DC) of 5.25V.
TLC5510INS Features
1 Functions
24 basic kinds of terminations
24 pin count
Minimal supply voltage of 4.75V
5V power supplies
Maximal supply voltage (DC) of 5.25V
TLC5510INS Applications
There are a lot of Texas Instruments TLC5510INS ADC applications.
- Spectrum Analysis
- In-building wireless telephony
- Data Acquisition Systems
- TD-SCDMA, WiMAX
- Imaging Systems
- Displaying
- Rotary encoder
- Communication test equipment
- Medical Instrumentation and medical imaging
- Industrial Process Control
