TLC555CPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | 555 Type, Timer/Oscillator (Single) |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Analog Waveform Generation Functions |
| Max Power Dissipation | 525mW |
| Voltage - Supply | 2V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 2.1MHz |
| Base Part Number | TLC555 |
| Pin Count | 14 |
| Supply Voltage-Min (Vsup) | 2V |
| Operating Supply Current | 360μA |
| Nominal Supply Current | 250μA |
| Power Dissipation | 525mW |
| Quiescent Current | 250μA |
| Number of Timers/Counters | 1 |
| Supply Current-Max (Isup) | 0.4mA |
| High Level Output Current | -10mA |
| Low Level Output Current | 100mA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC555CPWR Overview
There is a 14-TSSOP (0.173, 4.40mm Width) that comes with the timer clock, which is enclosed in the packaging. 2.1MHz is set as the frequency of the programmable timer.It is used to pack in Cut Tape (CT) case. Mounting type Surface Mount is recommended.2V~15V is the maximum voltage that can be supplied by the programmable timer.The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 360μA voltage. The LinCMOS? relates to the digital timer's series. It is based on TLC555. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock has 57.209338mg in weight. The timer clock runs quiescent current at 250μA. The number of Timers/Counters on the device is 1.
TLC555CPWR Features
Operate frequency at 2.1MHz
Package / Case: Cut Tape (CT)
Mounting Type:Surface Mount
Quiescent Current at 250μA
1 Timers/Counters
TLC555CPWR Applications
There are a lot of Texas Instruments TLC555CPWR Programmable Timers & Oscillators applications.
- Power-Gating Applications
- Internet of Things (IoT)
- Home Automation Sensors
- Delay circuits
- “Heartbeat” Timers
- Motor control
- Sensor Node
- High Vibration, High Acceleration Environments
- Electric Vehicles
- Smart Key
