TLC5904PZP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 100 |
| Weight | 505.386949mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 4.7W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 15MHz |
| Base Part Number | TLC5904 |
| Pin Count | 100 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 70mA |
| Power Dissipation | 4.7W |
| Output Current | 80mA |
| Max Supply Current | 70mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 80mA 120mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 15 MHz |
| Supply Voltage1-Nom | 5V |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5904PZP Overview
Save board space with 100-TQFP Exposed Pad package. There are 16 outputs used for the design of this LED drivers.Surface Mount is used to mount the led driver.It emerges as a Linear with high efficiency.When the temperature is -20°C~85°C TA, it can work normally.It operates on the basis of the frequency of 15MHz.For its operation, terminations with a value of 0 are used.There are 100 pins used to form the base of its configuration.It is estimated that there are 16 segments.It is under the base part number TLC5904 that the LED driver can be found.It's acceptable for the voltage to be 5.5V.This device produces a voltage of 17V volts.The device has a pin count of 100.As a result, its characteristics can also be categorized as Display Drivers.This device requires a minimum input voltage of 4.5V.The system works with a minimum supply voltage of 4.5V in order to achieve maximum efficiency.Supply current is limited to 5.5V at its maximum value.With a minimum supply current less than 70mA, this device achieves high efficiency.A load can be supplied with 80mA current.Systems require 5V voltage to operate.
TLC5904PZP Features
Available in the 100-TQFP Exposed Pad package
Operating temperature of -20°C~85°C TA
Frequency of 15MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
TLC5904PZP Applications
There are a lot of Texas Instruments TLC5904PZP LED Driver ICs applications.
- Architectural lighting
- Refrigeration lighting
- Medical surgery lighting
- Down lights
- LED headlights
- General lighting
- Stage Lighting and Signage
- White LED Backlight for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Power source for accessories such as car audios, car navigation systems, and ETC systems
