TLC5905PAPG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 258.207457mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 15MHz |
| Pin Count | 64 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 4.9W |
| Nominal Supply Current | 70mA |
| Power Dissipation | 4.9W |
| Max Supply Current | 70mA |
| Current - Output | 80mA |
| Voltage - Output | 17V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Supply Voltage1-Nom | 5V |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC5905PAPG4 Overview
TQFP saves board space. Typically, LED drivers have 16 outputs.This system operates at 15MHz frequency.For its operation, terminations with a value of 0 are used.In this LED driver, the base is configured as 64.It is estimated that there are 16 segments.The device has been mounted on the Surface Mount.Ideally, the supply voltage should be 5.5V.The output voltage of the device is 17V.On this device, there are 64 pins.According to its characteristics, it is also classified into Display Drivers.A minimum supply voltage of 4.5V is required to meet the highest efficiency standards.It is capable of delivering high efficiency when the maximal supply current is below 70mA.Operating temperatures should not exceed 85°C in order to ensure stable operation.For stable operation, the operating temperature should be higher than -20°C.It is necessary to power systems with a voltage of 5VIn this part, LED DISPLAY DRIVER refers to the interface IC.Set the part output current to 80mA.
TLC5905PAPG4 Features
Available in the TQFP package
Frequency of 15MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
TLC5905PAPG4 Applications
There are a lot of Texas Instruments TLC5905PAPG4 LED Driver ICs applications.
- Amusement Machines
- General lighting
- Other Electronic Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Scanners and Handy Terminals
- Flicker-free LED Lighting using R1580N
- Portable lighting
- High-end retail lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
