TLC59108FIPWR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Base Part Number | TLC59108 |
| Pin Count | 14 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 9mA |
| Power Dissipation | 1.2W |
| Output Current | 120mA |
| Max Supply Current | 9mA |
| Voltage - Output | 17V |
| Topology | Boost |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 30mA |
| fmax-Min | 1 MHz |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
TLC59108FIPWR Overview
The 20-TSSOP (0.173, 4.40mm Width) package saves space on the board. It has 8 outputs for LED drivers.In order to mount the led light driver, Surface Mount is used.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.The frequency of 25MHz is used as the basis for its operation.It operates with 20 terminations.This LED driver is configured with a base of 20 pins.Based on our estimates, there are 8 segments.There is a base part number TLC59108 for this LED driver.An acceptable maximum value for the supply voltage is 5.5V.There is 17V voltage output from the device.14 pins are included in it.Further, its characteristics allow it to be classified as Display Drivers.The minimal input voltage is 3V.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.The maximum value of supply current is 5.5V.In order to maintain maximum efficiency, the supply current cannot exceed 9mA.Loads can only be powered by 120mA current.At maximum output current 120mA, it will deliver all the benefits of a LED driver.
TLC59108FIPWR Features
Available in the 20-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 25MHz
Supply voltage of 4.5V
TLC59108FIPWR Applications
There are a lot of Texas Instruments TLC59108FIPWR LED Driver ICs applications.
- Architectural lighting
- Constant Voltage Power Source for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- Down lighting
- Down lights
- LED headlights
- Linear fluorescent
- White LED Backlight for portable equipment
- Flicker-free LED Lighting using R1580N
- Museum lighting
