TLC59116FIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.6W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Base Part Number | TLC59116 |
| Pin Count | 28 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 13mA |
| Power Dissipation | 1.6W |
| Output Current | 120mA |
| Max Supply Current | 13mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 120mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 30mA |
| fmax-Min | 1 MHz |
| Dimming | I2C |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59116FIPWR Overview
The board's 28-TSSOP (0.173, 4.40mm Width) package saves space. LED drivers design with 16 outputs.It is possible to mount the led driver using Surface Mount.When it emerges as a Linear, it shows high-performance and reliability.It is possible for the led driver ic to function normally at -40°C~85°C TA.The system operates on the basis of the frequency 25MHz.The terminations 28 are designed for its operation.To form its configuration, there are 28 pins.The segment count is 16.The LED driver is based on part number TLC59116.It is acceptable for the supply voltage to be 5.5V.The output voltage of this device is 17V.There are 28 pins on it.Additionally, it is categorized into Display Drivers according to its characteristics.It operates with the minimal input voltage of 3V.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.5.5V is the maximum value of supply current that can be used.When the maximum supply current is less than 13mA, this device is capable of providing high efficiency.In this case, the load can only be supplied with 120mA current.
TLC59116FIPWR Features
Available in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 25MHz
Supply voltage of 4.5V
TLC59116FIPWR Applications
There are a lot of Texas Instruments TLC59116FIPWR LED Driver ICs applications.
- Linear fluorescent
- Constant Voltage Power Source for portable equipment
- Medical surgery lighting
- Portable lighting
- LED Lightings for Inspection Devices
- Stage Lighting and Signage
- General lighting
- Other Electronic Devices
- White LED Backlight for portable equipment
- Panel lighting
