TLC5911PZP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 100 |
| Weight | 505.386949mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 4.7W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | TLC5911 |
| Pin Count | 100 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 35mA |
| Power Dissipation | 4.7W |
| Output Current | 80mA |
| Max Supply Current | 35mA |
| Voltage - Output | 15V |
| Topology | Shift Register |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 20 MHz |
| Supply Voltage1-Nom | 5V |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5911PZP Overview
To save space on the board, it has a 100-TQFP Exposed Pad package. LED drivers are designed with 16 outputs.As far as mounting is concerned, Surface Mount is adopted.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.If the led driver ic is set to -20°C~85°C TA, it will work normally.A frequency of 20MHz is used to operate it.100 terminations are used in its operation.This configuration is built upon 100 pins.16 segments exist.Under the base part number TLC5911, you'll find this LED driver.5.5V is an acceptable voltage.The device has a voltage output of 15V volts.100 pins are available on the device.As a result, its characteristics can also be categorized as Display Drivers.A minimal input voltage of 4.5V is required for it to operate.With a minimal supply voltage of 4.5V, it reaches the highest efficiency levels.Supply current is limited to 5.5V at its maximum value.This device is able to provide high efficiency when the maximal supply current should be less than 35mA.In this case, the load can only be supplied with 80mA current.Systems require 5V voltage to operate.
TLC5911PZP Features
Available in the 100-TQFP Exposed Pad package
Operating temperature of -20°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
TLC5911PZP Applications
There are a lot of Texas Instruments TLC5911PZP LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Sports Facility Lighting
- High-end retail lighting
- Stage Lighting and Signage
- Portable lighting
- Amusement Machines
- Industrial LED Lighting: Image Recognition Devices
- LED Lightings for Industrial Equipment
- Flicker-free LED Lighting using R1580N
- LED headlights
