TLC5916ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC5916 |
| Pin Count | 16 |
| Max Output Current | 120mA |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 1.5W |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 8 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5916ID Overview
Using its 16-SOIC (0.154, 3.90mm Width) package, it is possible to save board space. The led driver mounting is done by using Surface Mount.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.It is possible for the led driver ic to operate normally at -40°C~125°C TA.Signage has significant advantages.In this case, it operates with terminations of 0.Its configuration is based on 16 pins.Segments counted are 8.Part number TLC5916 represents this LED driver.5.5V is an acceptable voltage.20V is the voltage output.It is equipped with 16 pin count.In addition to Display Drivers, it is also classified by its characteristics.The minimum input voltage for this device is 3V.For maximum efficiency, it requires a minimal supply voltage of 3V.It is possible to supply current up to 5.5V.This device is able to provide high efficiency when the maximal supply current should be less than 22mA.The current that can be supplied to the load is 120mA.This electronic component can fully perform its functions when the switching frequency is kept at 30MHz.A LED driver that operates at 120mA output current provides all the benefits of a LED driver.
TLC5916ID Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5916ID Applications
There are a lot of Texas Instruments TLC5916ID LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Sports Facility Lighting
- OLED power supply for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- Museum lighting
- Refrigeration lighting
- LED Lighting PFCs, Linear Dimmable
- LED headlights
- Panel lighting
- Replacement lamps
