TLC5916IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLC5916 |
| Pin Count | 16 |
| Max Output Current | 120mA |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 1W |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 8 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5916IN Overview
To save board space, it uses the 16-DIP (0.300, 7.62mm) package. It is mounted using Through Hole.In this case, the result is a Linear with high efficiency.-40°C~125°C TA is the operating temperature and it works fine.There are significant benefits for Signage.A termination of 16 is used to operate the LED driver.This configuration is built upon 16 pins.A total of 8 segments have been created.This LED driver has the part number TLC5916.5.5V is a reasonable voltage.It has a voltage output of 20V.16 pins are available on the device.Additionally, it can be classified as Display Drivers based on its characteristics.At a voltage of 3V, it operates at a minimal input voltage.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.There is 5.5V maximum value for supply current.As long as the maximum supply current is less than 22mA, this device is capable of providing high efficiency.In this case, the load can only be supplied with 120mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 30MHz.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 120mA.
TLC5916IN Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5916IN Applications
There are a lot of Texas Instruments TLC5916IN LED Driver ICs applications.
- Other Electronic Devices
- LED headlights
- Down lights
- Replacement lamps
- Constant Voltage Power Source for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- A- lamps
- Refrigeration lighting
- Stage Lighting and Signage
- Flicker-free LED Lighting using R1580N
