TLC5916INE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Frequency | 30MHz |
| Base Part Number | TLC5916 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 1W |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 120mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5916INE4 Overview
Using its 16-DIP (0.300, 7.62mm) package, it is possible to save board space. A LED driver with 8 outputs is designed.This mounting method is Through Hole.With high efficiency, it emerges as a Linear.It is capable of operating at a temperature of -40°C~125°C TA. Signage has significant advantages.The system operates at a frequency of 30MHz.In this case, it operates with terminations of 0.Its configuration is based on 16 pins.It consists of 8 segments.This LED driver has the part number TLC5916.A maximum supply voltage of 5.5V is acceptable.A 20V volt output voltage is provided by this device.A device with 16 pins is available.Additionally, it is categorized into Display Drivers according to its characteristics.A minimal input voltage of 3V is required for it to operate.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.When the maximum supply current is allowed, it reaches 5.5V.This device is able to provide high efficiency when the maximal supply current should be less than 22mA.You can supply 120mA current to the load.Even when operating at a maximal output current of 120mA, it is capable of delivering all the benefits of a LED driver.
TLC5916INE4 Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5916INE4 Applications
There are a lot of Texas Instruments TLC5916INE4 LED Driver ICs applications.
- Gallery lighting
- LED headlights
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for Tablets and Note PCs
- Panel lighting
- Down lighting
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Architectural lighting
- Other Electronic Devices
