TLC5916IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TLC5916 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 900mW |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 2 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5916IPW Overview
To save space on the board, it has a 16-TSSOP (0.173, 4.40mm Width) package. A LED driver with 8 outputs is designed.It adopts the way of Surface Mount for mounting.In this case, it emerges as a Linear with a high efficiency.The led light driver can work at -40°C~125°C TA.As a result, Signage is likely to benefit greatly.A termination of 16 is used to operate the LED driver.This configuration is built upon 16 pins.Segments counted are 2.The LED driver can be found under the base part number TLC5916.In this case, 5.5V is acceptable.There is a voltage output of 20V.A total of 16 pins are present on this device.As a result, its characteristics can also be categorized as Display Drivers.With a minimum input voltage of 3V volts, it can operate.As a result, it is designed to operate at a minimal voltage of 3V to ensure the most efficiency possible.When the maximum supply current is allowed, the value reaches 5.5V.With a minimum supply current less than 22mA, this device achieves high efficiency.A load can be supplied with 120mA current.As long as the switching frequency is maintained at 30MHz, this electronic component is able to perform all of its functions properly.When operating with a maximum output current of 120mA, it can deliver all the benefits of a LED driver.
TLC5916IPW Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5916IPW Applications
There are a lot of Texas Instruments TLC5916IPW LED Driver ICs applications.
- Down lighting
- A- lamps
- Other Electronic Devices
- LED headlights
- Industrial LED Lighting: Image Recognition Devices
- Amusement Machines
- Auxiliary lights for on-vehicle cameras
- Medical surgery lighting
- Stage and Studio lighting
- Flicker-free LED Lighting using R1580N
