TLC5916IPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 30MHz |
| Base Part Number | TLC5916 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 900mW |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5916IPWRG4 Overview
The 16-TSSOP (0.173, 4.40mm Width) package is used for saving board space. Using this LED driver, there are 8 outputs.Surface Mount represents this mounting method.There is no doubt that this is a very efficient and reliable Linear.-40°C~125°C TA is the operating temperature of the led driver.Signage has many advantages.In this case, the frequency is 30MHz.It operates with 16 terminations.There are 16 pins on the base of this LED driver.The segment count is 8.It is under the base part number TLC5916 that you can find this LED driver.It is acceptable to supply voltages of 5.5V volts.The voltage output by it is 20V.16 pins are used on the device.Additionally, it is categorized into Display Drivers according to its characteristics.The minimum input voltage for this device is 3V.A minimal supply voltage of 3V is required for it to achieve the highest efficiency.Supply current is limited to 5.5V at its maximum value.Whenever the supply current is lower than 22mA, it can provide high efficiency.In this case, the load can only be supplied with 120mA current.Even when operating at a maximal output current of 120mA, it is capable of delivering all the benefits of a LED driver.
TLC5916IPWRG4 Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5916IPWRG4 Applications
There are a lot of Texas Instruments TLC5916IPWRG4 LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Industrial LED Lighting: Image Recognition Devices
- Museum lighting
- Stage and Studio lighting
- LED headlights
- LED Lightings for Inspection Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Amusement Machines
- Refrigeration lighting
