TLC5917IDG4
| Parameters | |
|---|---|
| Package / Case | D |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Pin Count | 16 |
| Max Output Current | 120mA |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1.5W |
| Nominal Supply Current | 22mA |
| Power Dissipation | 1.5W |
| Max Supply Current | 22mA |
| Current - Output | 120mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC5917IDG4 Overview
D package saves space on the board. Based on the frequency of 30MHz, it operates.A termination of 16 is used to operate the LED driver.A configuration of this chip is made up of 16 pins.There are estimated to be 8 segments.It is acceptable to supply voltages of 5.5V volts.17V is the output voltage.16 pins are included in it.The input voltage must be minimally 3V.With a minimal supply voltage of 3V, it reaches the highest efficiency levels.5.5V is the maximum value of supply current that can be used.If the maximum current supply is less than 22mA, this device provides high efficiency.It is important that the operating temperature not exceed 125°C in order to ensure stable operation.In order to maintain stable operation, a temperature greater than -40°C is essential.LED drivers deliver all their benefits with a maximum output current of 120mA.Maintain the part's output current at 120mA.
TLC5917IDG4 Features
Available in the D package
Frequency of 30MHz
Supply voltage of 3.3V
TLC5917IDG4 Applications
There are a lot of Texas Instruments TLC5917IDG4 LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- Down lighting
- General lighting
- Replacement lamps
- Down lights
- Amusement Machines
- Auxiliary lights for on-vehicle cameras
- Other Electronic Devices
- Dimmable LED for vehicle interiors
- OLED power supply for portable equipment
