TLC5917IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Base Part Number | TLC5917 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 1.5W |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 2 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5917IDR Overview
Using its 16-SOIC (0.154, 3.90mm Width) package, it is possible to save board space. LED drivers design with 8 outputs.In this case, mounting method is Surface Mount.The system emerges as a Linear with high efficiency.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.There are considerable benefits for Signage.As a result, it operates on the basis of frequency 30MHz.In this case, the terminations are set to 16.The LED light driver is configured with a base of 0 pins.Based on our estimates, there are 2 segments.TLC5917 is the base part number for this LED driver.It is acceptable to supply voltages of 5.5V volts.It produces a voltage of 20V volts.On this device, there are 16 pins.Additionally, it is categorized into Display Drivers according to its characteristics.The minimal input voltage is 3V.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.The allowable maximum value of supply current reaches 5.5V.When the maximum supply current is less than 22mA, the device is able to provide a high level of efficiency.Loads can only be powered by 120mA current.When operating with a maximum output current of 120mA, it can deliver all the benefits of a LED driver.
TLC5917IDR Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5917IDR Applications
There are a lot of Texas Instruments TLC5917IDR LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- General lighting
- Industrial LED Lighting: Image Recognition Devices
- Medical surgery lighting
- Gallery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Museum lighting
- Sports Facility Lighting
- Linear fluorescent
- OLED power supply for portable equipment
