TLC5917IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLC5917 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 1W |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 2 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5917IN Overview
Using its 16-DIP (0.300, 7.62mm) package, it is possible to save board space. These LED drivers have 8 outputs.Through Hole is used to mount the led driver.When it emerges as a Linear, it performs extremely well and is highly reliable.At -40°C~125°C TA, the led driver is capable of operating.The benefits are considerable for Signage.In this case, the termination value is 16.There are 16 pins on the base of this LED driver.There are estimated to be 2 segments.It is under the base part number TLC5917 that the LED driver can be found.It is acceptable to have a maximum voltage of 5.5V.There is 20V voltage output from it.In this device, there are 16 pins.Moreover, it can be classified as Display Drivers due to its characteristics.At its minimal input voltage, it operates at 3V.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 3V.In terms of supply current, there is a maximum value of 5.5V.When the maximum supply current is below 22mA, it is capable of delivering high efficiency.You can supply 120mA current to the load.As long as the switching frequency is maintained at 30MHz, this electronic component is able to perform all of its functions properly.When operating with a 120mA output current, the LED driver delivers all the benefits.
TLC5917IN Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5917IN Applications
There are a lot of Texas Instruments TLC5917IN LED Driver ICs applications.
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for portable equipment
- Linear fluorescent
- High-end retail lighting
- Down lights
- Down lighting
- Sports Facility Lighting
- Refrigeration lighting
- Constant Voltage Power Source for portable equipment
- LED Lighting PFCs, Linear Dimmable
