TLC5917IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TLC5917 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 900mW |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 2 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5917IPW Overview
Board space is saved by its 16-TSSOP (0.173, 4.40mm Width) package.For the design of these LED drivers, 8 outputs are used.As far as mounting is concerned, Surface Mount is adopted.Linear emerges with high efficiency and reliability.It is possible for the led light driver to operate at a temperature of -40°C~125°C TA.Signage has significant advantages.In this case, it operates with terminations of 0.The LED light driver is configured with a base of 0 pins.The number of segments is 2.There is a base part number TLC5917 for this LED driver.It's acceptable for the voltage to be 5.5V.This device produces a voltage of 20V volts.16 pins are on the device.As a result, its characteristics can also be categorized as Display Drivers.At a voltage of 3V, it operates at a minimal input voltage.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.Whenever the maximum supply current is allowed, the value reaches 5.5V.When the maximum supply current is less than 22mA, this device is able to provide high efficiency.Loads can only be powered by 120mA current.The electronic component can function fully when the switching frequency is maintained at 30MHz.When operating with a maximum output current of 120mA, it can deliver all the benefits of a LED driver.
TLC5917IPW Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5917IPW Applications
There are a lot of Texas Instruments TLC5917IPW LED Driver ICs applications.
- Down lights
- White LED Backlight for portable equipment
- A- lamps
- Flicker-free LED Lighting using R1580N
- LED backlight driver for LCD displays for Tablets and Note PCs
- Constant Voltage Power Source for portable equipment
- Replacement lamps
- LED backlight driver for LCD displays for portable equipment
- LED Lightings for Industrial Equipment
- LED headlights
