TLC5917IPWG4
| Parameters | |
|---|---|
| Max Output Current | 120mA |
| Power Supplies | 3.3/5V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 900mW |
| Nominal Supply Current | 22mA |
| Power Dissipation | 900mW |
| Max Supply Current | 22mA |
| Current - Output | 120mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Pin Count | 16 |
TLC5917IPWG4 Overview
On the board, there is also a TSSOP package that saves space.Frequency 30MHz is the basis of operation.For its operation, 16 terminations are designed.The configuration of the board is built around 16 pins.The number of segments is 8.An acceptable maximum value for the supply voltage is 5.5V.17V is the voltage output.In this device, there are 16 pins.In addition to Display Drivers, it is also classified by its characteristics.With a minimum input voltage of 3V volts, it can operate.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.The maximum value of supply current is 5.5V.When the maximum supply current is below 22mA, the device can deliver high efficiency.Operating temperatures should not exceed 125°C in order to ensure stable operation.The operating temperature should be higher than -40°C so as to realize stable operation.When operating with a maximum output current of 120mA, it can deliver all the benefits of a LED driver.This part is equipped with an interface IC marked with LED DISPLAY DRIVER.The interface IC that the part is equipped with is indicated by 120mA.
TLC5917IPWG4 Features
Available in the TSSOP package
Frequency of 30MHz
Supply voltage of 3.3V
TLC5917IPWG4 Applications
There are a lot of Texas Instruments TLC5917IPWG4 LED Driver ICs applications.
- A- lamps
- Portable lighting
- Stage Lighting and Signage
- Architectural lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Other Electronic Devices
- Amusement Machines
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lightings for Industrial Equipment
