TLC5917IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 30MHz |
| Base Part Number | TLC5917 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 900mW |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 2 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5917IPWR Overview
Using its 16-TSSOP (0.173, 4.40mm Width) package, it is possible to save board space. For the design of this LED driver, 8 outputs are used.In order to mount the led light driver, Surface Mount is used.It emergys as a Linear with high efficiency and reliable performance.At -40°C~125°C TA, the led driver is capable of operating.Signage has considerable advantages.It operates on the basis of the frequency of 30MHz.For its operation, terminations with a value of 0 are used.There are 16 pins on the base of this LED driver.A total of 2 segments have been created.Under the base part number TLC5917, you'll find this LED driver.The voltage of 5.5V is acceptable.There is 20V voltage output from it.On it, there are 16 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.A voltage of 3V is its minimal input voltage.It works with the minimal supply voltage of 3V to meet highest efficiency standards.Currently, the supply current can only reach 5.5V.Its high efficiency is based on the fact that the maximal supply current should not exceed 22mA.A load can be supplied with 120mA current.When operating at the maximum output current of 120mA, it is capable of providing all the benefits associated with LED drivers.
TLC5917IPWR Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5917IPWR Applications
There are a lot of Texas Instruments TLC5917IPWR LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- Auxiliary lights for on-vehicle cameras
- LED Lightings for Industrial Equipment
- General lighting
- Refrigeration lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED headlights
- Amusement Machines
- Street lighting
- Other Electronic Devices
