TLC5917IPWRG4
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 30MHz |
| Base Part Number | TLC5917 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 120mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 900mW |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 900mW |
| Terminal Position | DUAL |
TLC5917IPWRG4 Overview
As a result of its 16-TSSOP (0.173, 4.40mm Width) package, it helps to save board space on the board. Using this LED driver, there are 8 outputs.The led driver mounting is done by using Surface Mount.The system emerges as a Linear with high efficiency.If the led driver ic is set to -40°C~125°C TA, it will work normally.Signage has many benefits.Based on the frequency of 30MHz, it operates.There are 16 terminations associated with it.The LED light driver has a base configuration of 16 pins.In total, it includes 8 segments.TLC5917 is the base part number for the LED driver.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.A voltage of 20V is produced by it.In this device, there are 16 pins.Further, its characteristics allow it to be classified as Display Drivers.The minimum input voltage for this device is 3V.For maximum efficiency, it requires a minimal supply voltage of 3V.Supply current is limited to 5.5V at its maximum value.Whenever the supply current is lower than 22mA, it can provide high efficiency.You can supply 120mA current to the load.When operating with a 120mA output current, the LED driver delivers all the benefits.
TLC5917IPWRG4 Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5917IPWRG4 Applications
There are a lot of Texas Instruments TLC5917IPWRG4 LED Driver ICs applications.
- Linear fluorescent
- LED headlights
- Dimmable LED for vehicle interiors
- Other Electronic Devices
- Medical surgery lighting
- Flicker-free LED Lighting using R1580N
- LED Lightings for Inspection Devices
- Scanners and Handy Terminals
- LED Lightings for Industrial Equipment
- Constant Voltage Power Source for portable equipment
