TLC5917QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| Subcategory | Display Drivers |
| Max Power Dissipation | 600mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Base Part Number | TLC5917 |
| Pin Count | 16 |
| Max Output Current | 120mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 22mA |
| Power Dissipation | 600mW |
| Output Current | 120mA |
| Max Supply Current | 22mA |
| Quiescent Current | 6mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5917QDRQ1 Overview
In order to save board space, the led driver uses the 16-SOIC (0.154, 3.90mm Width) package. This mounting method is Surface Mount.As a Linear, it has high efficiency and reliability.-40°C~125°C TA is the operating temperature for the led light driver.There are many benefits for Signage.As a result, it operates on the basis of frequency 30MHz.There are 16 terminations associated with it.In this LED driver, the base is configured as 16.The number of segments is 8.A base part number of TLC5917 is associated with this LED driver.It is acceptable to operate with a supply voltage of 5.5V.Its output voltage is 17V.16 pins are on the device.In addition, it can be classified as Display Drivers according to its characteristics.The minimal input voltage is 3V.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.When the maximum supply current is allowed, it reaches 5.5V.As long as the maximum supply current is under 22mA, it can deliver high efficiency.Loads can only be powered by 120mA current.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 120mA.LED drivers from the Automotive, AEC-Q100 series are essential components for a wide variety of products.In the absence of external factors, 6mA current is consumed.
TLC5917QDRQ1 Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5917QDRQ1 Applications
There are a lot of Texas Instruments TLC5917QDRQ1 LED Driver ICs applications.
- Replacement lamps
- General lighting
- Down lights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Other Electronic Devices
- Amusement Machines
- Gallery lighting
- Constant Voltage Power Source for portable equipment
- Dimmable LED for vehicle interiors
- A- lamps
